Non-woven fabric machine

The machinery operates steadily, producing a lot, and doing so efficiently. It is used in non-woven fabrics for clothing, non-woven fabrics for medical and sanitary materials, construction non-woven fabrics, industrial non-woven fabrics, agricultural non-woven fabrics, disposable items for hotels, and other non-woven and industrial fabrics, among other applications. The spun-bond nonwoven fabric produced is uniform, strong, breathable, non-toxic, and tasteless, and it complies with environmental protection standards.

The primary equipment for producing non-woven fabrics is nonwoven machinery of the SS type. When maintaining SS type nonwoven equipment, we should do a good job to increase its working effectiveness and lengthen its service life.

Its distinctive qualities are reflected in spunbond nonwovens technology. It transcends the distinctions between cloth, film, and paper and has the ability to directly affect the fields of use for all three types of goods. The non-woven fabric machinery uses polypropylene fibre chips as its primary raw material, and it includes a chip conveying device, a melt extrusion spinning system that includes a single screw extruder, a melt pump, a melt filter, a spinning box, a spinneret, and a melt pipe, as well as a cooling and drafting system that includes a side blowing device, a drafting device, a diffusion duct, a vacuum suction device,

Making PP spun-bond non-woven fabrics is a good use for this machine. Extrusion, spinning, quenching, closing air stretching, web forming, calendaring, winding, and cutting are carried out on the PP chips used as the raw material input. After that, the product is packaged for storage and distribution.

The SSMS Spunbond Nonwoven Machine is a composite nonwoven production line that combines the manufacturing processes of spunbond and meltblown. The four beams that make up the SSMS Spunbond Nonwoven Machine can be adjusted to meet your specific manufacturing needs.

It is forbidden for the spunbond nonwoven fabric machine to let too much water or oil into the pressure system. If it is possible to check that the oil volume of each inner cup of the converter is sufficient, this will help prevent issues, shorten the life of the cylinder barrel, and ensure that the air is dried and cleaned. If not, the pressure relief valve should be pushed forwards and should not be used for an extended period of time at the back.

The SMS Nonwoven Production Line, which combines spunbond and meltblown manufacturing processes, is a composite line for the production of nonwoven materials. The web is made up of three layers: the first layer is created by the first spunbond spinning system, the second layer is created by the second spunbond spinning system, and the third layer is created by the melt-blown spinning system. To create an SMS composite Non-woven Fabric, the three-layer web is first hot-rolled together, then cut and wound by a rolling machine.

A four-die spin Using four sets of die heads (S/M/M/S), melt nonwoven fabric is a type of composite nonwoven fabric that combines spunbond with melt blown technologies. Spunbonded non-woven fabric (S), melt blown non-woven fabric (M), melt blown non-woven fabric (M), and spunbonded non-woven fabric (S) are the "four die heads" that stand in for these materials, respectively.

A three-layer composite non-woven fabric made of top spunbond polypropylene, middle melt-blown polypropylene, and bottom spunbond polypropylene is known as spinning melt non-woven fabric, or SMS. It can be claimed that it combines the benefits of spunbonded non-woven fabric with meltblown cloth. SMS non-woven fabric is a staple in the medical and healthcare industries and is used to make masks, disposable protective gear, and protective garments.

A certain amount of moisture is typically present in the polymer chips produced by pelletizing on the conveyor belt; this moisture must be dried and removed before spinning. It is not necessary to dry non-aqueous polymer chips like polypropylene.

The SSMS Spunbond Nonwoven Machine is a composite nonwoven production line that combines the manufacturing processes of spunbond and meltblown. The four beams that make up the SSMS Spunbond Nonwoven Machine can be adjusted to meet your specific manufacturing needs.

Polylactic acid (PLA), an environmental protection substance, has undergone numerous transformations and applications in the non-woven fabric sector. It is extremely biodegradable. The microorganisms in the soil totally decompose it when it is thrown away, producing carbon dioxide and water. It actually "comes from nature and belongs to nature" and does not contaminate the environment.